Video Settings (Video In/Out) - Sony 3-293-880-11(1) Operating Instructions Manual

Video Settings (Video In/
Out)
You can adjust items related to the image,
such as size and colour, according to the type
of TV, tuner, or decoder connected to the
recorder.
Input Colour System
Selects the colour system when picture noise
appears after you change the "Input Line
System" setting (page 101).
Auto Recorder automatically
detects signals of colour
systems and selects the
appropriate colour system.
PAL
Selects the PAL colour
system when "Input Line
System" is set to "PAL/
SECAM."
SECAM Selects the SECAM colour
system when "Input Line
System" is set to "PAL/
SECAM."
z Hint
When "Input Line System" is set to "NTSC," you
can select "Auto," "3.58NTSC," or "PAL-60."
Component Video Out
Selects the signal format in which the
recorder outputs video signals: interlace or
progressive, from the COMPONENT
VIDEO OUT jacks.
Normal(Inter- Outputs signals in the
lace)
interlace format.
Progressive Outputs signals in the
progressive format. Select
this when you want to view
progressive signals.
b
Notes
• When you set "LINE 3 Out" to "RGB," you
cannot set "Component Video Out."
• When you connect the recorder to a monitor or
projector via only the COMPONENT VIDEO
OUT jacks, do not set "LINE 3 Out" to "RGB."
If you set "LINE 3 Out" to "RGB," in this case,
the picture may not appear.
• When picture noise appears after you set the
recorder to progressive format, hold down x
(stop) on the recorder, and press Z (open/close)
on the recorder.
• No video signals are output when using the
HDMI connection.
LINE 3 Out
Selects a method of outputting video signals
for the LINE 3 – TV jack.
Video Outputs video signals.
S-Video
Outputs S-video signals.
RGB Outputs RGB signals.
b
Notes
• If your TV does not accept S-video or RGB
signals, the image will not be displayed in the
selected method on the TV screen even if you
select "S-Video" or "RGB." Refer to the
instructions supplied with your TV.
• SMARTLINK is available only when "Video" is
selected.
• RGB signals are not output when using the
HDMI connection.
105
,continued