Description
3.5 Description of the components
3.5.8
Power Stack Adapter
The Power Stack Adapter (PSA) acts as the physical interface between the power unit and
the open-loop/closed-loop controller. This is where the galvanic isolation (electrical coupling
via light) between the power unit and the open-loop controller takes place. Data is exchanged
between the Power Stack Adapter and the Control Unit via the DRIVE-CLiQ high-speed serial
communication interface.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
Figure 3-3
38
X11 – X14
X15, X16,
X31 – X34
X35, X36
X51 – X54
X241, X242
X70 – X79
X81
X200 – X202
X231, X232
S5.0
S5.1
X221, X222
LEDs
X210
Overview of PSA interfaces
Gating of the power semiconductors, inverter phase u
Gating of the power semiconductors, crowbar
Gating of the the power semiconductors, inverter phase v
Gating of the power semiconductors, braking chopper
Gating of the power semiconductors, inverter phase w
Selecting Safe Torque Off
Actual value channels 0 to 9
Trip line
DRIVE-CLiQ interfaces
Analog and digital outputs
Switches of the analog inputs, voltage/current measurement AI0
Switches of the analog inputs, voltage/current measurement AI1
Analog and digital inputs, temperature sensor connections
Diagnostics via LEDs
Electronics power supply
SINAMICS SM150 6SL3845-7NN46-7AA0
Operating Instructions 04/2017