Wiring Diagram - Makita Makstar BDF452 Technical Information

W
iring diagram
Fig. 19
Brush holder complete
Lead wires of LED Job light
Fix Lead wires of LED Job light
with Lead wire holders A, B and C.
Lead wire holder A
Lead wire holder B
Connector
Lead wire holder C
The Flag connector has to be so connected
that the wire connecting portions are positioned
on the side of pole marks of Terminal.
Yoke unit
Switch
Terminal
Wire connecting portion
Flag connector
Lead wires of LED Job light
must be tight between
Lead wire holder A and
LED Job light.
Lead wires of Switch
boss
Do not route Lead wires of Switch
between the boss and the wall of
Housing L.
Pole mark
Terminal
P 8 / 8
LED Job light