Wiring Diagram - Makita DF010D Technical Information

W
iring diagram
Fig. D-2
Fix Controller lead wires
(red, black) in lead wire
holder here.
Put Controller lead wires
(signal path) in the groove
on Housing L here.
Gear case
Fix Switch unit (microswitch/ green color) to Gear case as illustrated above.
Terminal
Route this Lead wire (red) through the hook of Controller.
Motor housing L
Route Lead wires between
Switch unit (large) and rib.
terminal for battery
Do not put Lead wires
on ribs and emboss.
Switch unit (microswitch/ green color)
Controller
Switch unit (large)
emboss
rib rib Connector
Route Lead wires between
emboss and rib.
Handle (L) Motor housing
Do not pinch Lead wires between
Handle and Motor housing.
P 5/ 5
hook of Controller
Route LED lead wires
between ribs.
ribs LED