Checking Headlight Beam Angle, Adjusting If Necessary; Checking Tightness Of Rear Wheel Studs; Checking Tyre Pressures - BMW R 1150 R Maintenance Manual

Checking headlight beam
63 10 500
angle, adjusting if necessary
•
Motorcycle must be on a level surface.
•
Motorcycle with driver (approximately 85 kg/
187 lbs).
•
Remove trim (1).
•
Remove headlight (2) retaining bolts.
•
Correct the headlight range by swivelling the
headlight.
Setting for headlight beam angle adjuster
.. .-25 cm (9.8425 in) at a distance of 10 m (32.8 ft)
Checking tightness of rear wheel
studs
X
Tightening torque:
Securing screws for rear wheel .................. 105 Nm
2

Checking tyre pressures

1
•
Check/correct tyre pressures.
Tyre pressures:
Solo ..................................... front 2.2 bar (31.3 psi)
............................................. rear 2.5 bar (35.6 psi)
With pillion passenger .......... front 2.5 bar (35.6 psi)
............................................. rear 2.7 bar (38.4 psi)
R28000070
With pillion passenger and
luggage ................................ front 2.5 bar (35.6 psi)
............................................. rear 2.9 bar (41.2 psi)
R28000080
00.19