Briggs & Stratton 130G00 Repair Manual page 3

Foreword
This manual was written to assist engine technicians and service personnel with the maintenance and repair
procedures for Briggs & Stratton® engines. It assumes that persons using this manual have been properly
trained and are familiar with the service procedures for these products, including the proper use of required
tools and the application of appropriate safety practices. Persons untrained or unfamiliar with these procedures
or products should not attempt to perform such work.
Proper maintenance and repair is important to safe, reliable operation of all engines and engine-driven
systems. The maintenance, troubleshooting, and repair procedures described in this manual are appropriate
for the Briggs & Stratton engines described herein. Alternative methods or procedures may pose risks to
both personal safety and engine reliability and are not endorsed or recommended by Briggs & Stratton.
All information, illustrations, and specifications contained in this manual were based on the data available
at the time of publication. Briggs & Stratton Corporation reserves the right to change, alter, or otherwise
improve the product or the product manuals at any time without prior notice.
Briggs & Stratton offers two complementary publications to enhance understanding of engine technology,
maintenance, and repair. However, neither publication is a substitute for a recognized training program for
engine technicians.
• For consumers, Small Engine and Equipment Maintenance Guide (Part No. CE8155) provides a
comprehensive overview of how small air-cooled engines work, basic troubleshooting, and step-by-step
maintenance procedures.
• For engine technicians and consumers alike, an in-depth study of engine theory and operation can be
found in the textbook Small Engines (Part No. CE8020).
Both publications can be purchased at BRIGGSandSTRATTON.COM or through a local Briggs & Stratton
Authorized Service Dealer.
Copyright © 2017 Briggs & Stratton Corporation.
All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying or recording by any information storage and retrieval system, without
prior written permission from Briggs & Stratton Corporation.