Siemens SINAMICS S120 Getting Started page 75

Procedure
You can add an infeed via the hardware catalog.
1. Open the "Line Modules" entry in the hardware catalog.
Active Line Modules, Basic Line Modules and Smart Line Modules can be selected.
2. Select the unspecified infeed in the hardware catalog.
Figure 5-6
3. Drag the unspecified infeed to the device view.
Figure 5-7
Generally, the DRIVE-CLiQ connection is automatically established. The unspecified
infeed must now be specified in more detail.
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
Selecting an infeed
Infeed inserted
5.4 Creating a project offline in Startdrive
Commissioning
73