Description of block commands
You can find a description of the block-specific commands in the respective block manuals:
● FB 45 for MOBY U, MOBY D, RF200, RF300
● RFID standard profile; standard function for RFID systems
● Ident profile and Ident blocks, standard function for Ident systems
6.3
Configuration via OPC UA
Configuration of the communications module is not necessary for pure OPC UA work. You
can continue directly with configuration via WBM and with programming via OPC UA
interface.
SIMATIC RF185C, RF186C, RF188C
Operating Instructions, 10/2018, C79000-G8976-C512-01
Configuring
6.3 Configuration via OPC UA
51