Advertisement
Contents
Programming and User Codes .......................................... 2
Programming Code ........................................................... 2
User Codes ....................................................................... 2
Turn Lock Feature ............................................................... 2
Replacing the Batteries ...................................................... 3
BE369 Deadbolt ................................................................ 3
FE599 Lever Lock ............................................................. 3
Restoring Factory Settings ................................................ 4
Vacation Mode ..................................................................... 4
Manual Programming ......................................................... 4
Manual Programming Functions ....................................... 5
Emergency Key Override ................................................... 6
BE369 ................................................................................ 6
FE599 ................................................................................ 6
Troubleshooting .................................................................. 6
Lock Parts
• Located on the outside of the lock.
• Used to enter codes for programming and unlocking.
Thumbturns
• On the BE369 Deadbolt only.
• The inside thumbturn may be rotated at any time to retract (unlock) or extend (lock) the bolt.
• The outside thumbturn can be rotated to retract the bolt after a valid user code has been
entered.
• The outside thumbturn can also be rotated to extend the bolt after the
Schlage button has been pressed when Turn Lock feature is enabled.
Lever
• On the FE599 Lever Lock only.
• The inside lever can be rotated at any time to retract the latch.
• The outside lever can be rotated at any time, but will only retract the
latch when the lock is unlocked.
Cylinder
• Located on the outside of the lock.
• Used only in emergency situations to unlock the lock. See
Emergency Key Override
Lock and Unlock Buttons
• On the FE599 Lever Lock only.
• Used to put the lock in a locked or unlocked state.
• When these buttons are used, the lock will remain locked or unlocked
until locked or unlocked using the buttons, web interface or phone
application.
Lock and Unlock Light
• On the FE599 Lever Lock only.
• Lights red when inside lock button is pressed.
• Lights green when inside unlock button is pressed.
• Lights only when an inside button is pressed. Does not remain lit.
Schlage Wireless Locks
User Guide
on page 6 for more information.
BE369 Deadbolt
FE599 Lever Lock
Advertisement
Related Manuals for Schlage SCHLAGE LINK BE369
Summary of Contents for Schlage SCHLAGE LINK BE369
-
Page 1: Table Of Contents
Schlage Wireless Locks User Guide Contents Programming and User Codes ... 2 Programming Code ... 2 User Codes ... 2 Turn Lock Feature ... 2 Replacing the Batteries ... 3 BE369 Deadbolt ... 3 FE599 Lever Lock ... 3 Restoring Factory Settings ... 4 Vacation Mode ... -
Page 2: Programming And User Codes
All pre-programmed codes can be found on the yellow sticker on the front of the Installation Instructions that come with the lock. An identical label is also located on the inside (part that faces the door) of the keypad. Programming Code •... -
Page 3: Replacing The Batteries
Replacing the Batteries BE369 Deadbolt Remove cover screws. Remove screw on upper left to release upper battery tray. Hold battery tray in place while loosening screw. Upper battery tray will be released. Fully remove tray and remove three old AA batteries. Remove 9V battery. -
Page 4: Restoring Factory Settings
Restoring Factory Settings Restoring the factory settings will: • Restore the original programming code • Restore the pre-programmed user codes If you have an active account at www.schlagelink.com, the user codes listed in the web interface for the lock will be restored in the physical lock when lock reconnects with the bridge. -
Page 5: Manual Programming Functions
Manual Programming Functions Press the keys on the keypad as shown in the following steps. Wait for the confirmation indicator before proceeding to the next step. If you make a mistake, wait for all lights and beeps to stop and then start over from the beginning. Press (Six Numbers) -
Page 6: Emergency Key Override
Emergency Key Override If the battery fails completely, or if there is an electronic error, the lock can be unlocked manually using the key. BE369 FE599 Troubleshooting Problem Lights/Beeps Cause Entering a valid user code Green then using the keypad does not Red/Hi then unlock lock. - Page 7 Problem Lights/Beeps Cause Cannot change the programming code. Cannot delete all user codes at the keypad. Pressing the Schlage none button when the deadbolt is unlocked does not allow locking (deadbolt only). Thumbturn does not spin none freely when deadbolt is locked (deadbolt only).