Download
Share
Print this page
Schlage User Manual
  1. Manuals
  2. Brands
  3. Schlage Manuals
  4. Locks
  5. LINK FE599
  6. User manual

Schlage User Manual

Home keypad locks
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Contents
Programming and User Codes .......................................... 2
Programming Code ........................................................... 2
User Codes ....................................................................... 2
Turn Lock Feature ............................................................... 2
Replacing the Batteries ...................................................... 3
BE369 Deadbolt ................................................................ 3
FE599 Lever Lock ............................................................. 3
Restoring Factory Settings ................................................ 4
Vacation Mode ..................................................................... 4
Manual Programming ......................................................... 4
Manual Programming Functions ....................................... 5
Emergency Key Override ................................................... 6
BE369 ................................................................................ 6
FE599 ................................................................................ 6
Troubleshooting .................................................................. 6

Lock Parts

• Located on the outside of the lock.
• Used to enter codes for programming and unlocking.
Thumbturns
• On the BE369 Deadbolt only.
• The inside thumbturn may be rotated at any time to retract (unlock) or extend (lock) the bolt.
• The outside thumbturn can be rotated to retract the bolt after a valid user code has been
entered.
• The outside thumbturn can also be rotated to extend the bolt after the
Schlage button has been pressed when Turn Lock feature is enabled.
Lever
• On the FE599 Lever Lock only.
• The inside lever can be rotated at any time to retract the latch.
• The outside lever can be rotated at any time, but will only retract the
latch when the lock is unlocked.
Cylinder
• Located on the outside of the lock.
• Used only in emergency situations to unlock the lock. See
Emergency Key Override
Lock and Unlock Buttons
• On the FE599 Lever Lock only.
• Used to put the lock in a locked or unlocked state.
• When these buttons are used, the lock will remain locked or unlocked
until locked or unlocked using the buttons, web interface or phone
application.
Lock and Unlock Light
• On the FE599 Lever Lock only.
• Lights red when inside lock button is pressed.
• Lights green when inside unlock button is pressed.
• Lights only when an inside button is pressed. Does not remain lit.
Schlage Home Keypad Locks
User Guide
on page 6 for more information.
Cylinder
BE369 Deadbolt
Cylinder
Lever
FE599 Lever Lock
Keypad
Bolt
Outside
Thumbturn
Inside
Thumbturn
Keypad
Latch
Lock Button
Lock and
Unlock Light
Unlock Button
Inside
Lever

Advertisement

loading

Related Manuals for Schlage Schlage

Summary of Contents for Schlage Schlage

  • Page 1: Table Of Contents

    • The outside thumbturn can be rotated to retract the bolt after a valid user code has been entered. • The outside thumbturn can also be rotated to extend the bolt after the Schlage button has been pressed when Turn Lock feature is enabled. Lever • On the FE599 Lever Lock only.

  • Page 2: Programming And User Codes

    Programming and User Codes All locks are pre-programmed with a programming code and two user codes. The programming code and user codes can be changed at any time. Programming Code • Used to manually program the lock using the keypad. •...

  • Page 3: Replacing The Batteries

    Replacing the Batteries FE599 Lever Lock BE369 Deadbolt Remove cover screws. Remove cover screws. Remove screw on upper left to release upper battery tray. Remove cover. Hold battery tray in place while loosening screw. Remove battery cover. Upper battery tray will be released. Fully remove tray and Remove four old AA batteries.

  • Page 4: Restoring Factory Settings

    On the lock keypad, press and release the Schlage button. Reconnect the battery and wait until the Schlage button is no longer lit. Within ten (10) seconds, press and hold the Schlage button until it lights green and the lock beeps. Vacation Mode Vacation mode is used to disable all user codes at the keypad.

  • Page 5: Manual Programming Functions

    Manual Programming Functions Press the keys on the keypad as shown in the following steps. Wait for the confirmation indicator before proceeding to the next step. If you make a mistake, wait for all lights and beeps to stop and then start over from the beginning. Press Press Press New...

  • Page 6: Emergency Key Override

    Enter six-digit programming Uncheck Vacation using the keypad does not Red/Hi then code. checkbox. unlock lock. Schlage button does not light none Lock keypad is locked out Wait 30 seconds and try none when pressed because too many incorrect again.
  • Page 7 After entering a valid code on Green then AA batteries need to be Replace AA batteries. none Replacing the Batteries the deadbolt keypad, Schlage Orange replaced. button flashes green and page 3 for more information. then amber. Otherwise, lock appears to function normally (deadbolt only).

This manual is also suitable for:

Be369Fe599