Feature Controls - Sony XCD-SX910CR, XCD-SX710CR, XCD-SX910UV, XCD-SX910, XCD-SX710 Technical Manual

Feature Controls

This camera supports the following features.
AutoExposure Controls the target video level value when Shutter/gain is set to Auto.
Shutter Controls the exposure time. Can be controlled by both relative control values from 1/100,000 of a second to 16 seconds,
allocated from 3 to 1150, and absolute value control, from values 1/100,000 of a second to 17.5 seconds, set continuously.
Gain Can be changed to 0 to 18 dB (XCD-SX910CR/X710CR)/0 to 24 dB (XCD-SX910UV/SX910/X710), subdivided in
640 steps.
Trigger Sets external trigger mode. Trigger Mode 0 and 1 are available. Software Trigger Mode in which triggers can be output by
software.
Pan/Tilt Sets CCD output range (both horizontal (Pan) and vertical (Tilt)). The video mode predetermines the variable range. Not
available in Partial Scan Mode (Format7/Mode0).
Brightness Adjusts the black level precisely.
The XCD-SX910CR/X710CR supports the following
additional features.
White Balance Adjusts the White Balance by adjusting the R and B gain with respect to G.
Hue Adjusts G gain. Use this feature when you cannot obtain the correct White Balance using the R and B gain.
Optical Filter Selects the pixels to output from among the R, G, and B data on the Bayer pattern.
Four kinds of Bayer pattern are available.
XCD-SX910CR/X710CR
XCD-SX910UV
XCD-SX910/X710
Control
22