Functions Of Parts And Controls - Sony HDVF-EL70 Operation Manual

Functions of Parts and Controls

1
wh
wg
wf
wd
ws
wa
a ASSIGN. (assignable) switches
Can be used to store frequently used functions.
The switches ASSIGN. L1 and ASSIGN. L2 are located
on the left handle, and ASSIGN. R1 and ASSIGN. R2 are
located on the right handle.
Storing a function is performed using "ASSIGN. L1,"
"ASSIGN. L2, " "ASSIGN. R1," or "ASSIGN. R2" in the
FUNCTION menu.
b PEAKING PLUS indicator (blue)
Lights up when "PEAKING MODE" in the PEAKING
menu is set to "PLUS."
c MAG (magnification) indicator (amber)
Lights up when the displayed image is magnified (when
the ASSIGN. switch of the MAGNIFICATION function
is set to "ON," or "MAGNIFICATION" in the
MAGNIFICATION menu is set to "ON").
d R TALLY indicator (red)
Lights up when the red tally signal is input.
e G TALLY indicator (green)
Lights up when the green tally signal is input.
32
Functions of Parts and Controls
2 3 4 5 6 7
w; ql qk qj qh
8 9 0
qa
STOP
FREE
qg qf
f Reserve indicator
Currently not used.
g Up-tally lamp (red)
The supplied number plate can be attached to this.
The lamp lights up when the red tally signal is input.
h BRIGHT control
Adjusts the brightness of the viewfinder image.
This control does not affect the output signal of the
camera.
i CONTRAST control
Adjusts the contrast of the viewfinder image.
This control does not affect the output signal of the
camera.
j Tilt-lock knob
Turn this knob in the direction of the arrow indicated on
the knob to secure the tilting position of the viewfinder.
k Slide position knob
Use this knob when adjusting the position of the
viewfinder screen forward or backward.
FREE: The viewfinder can be slid for adjusting the
position.
qs qd
SLIDE
LOCK
COUNTER BLANCE