Viewfinder Mount Section (Top) And Display Controls (Rear) - Sony CA-901K Operation Manual

Location and Function of Parts

Viewfinder Mount Section (Top) and Display Controls (Rear)

5 UP TALLY switch
Power indicator
6 Box cursor control knob
1 Viewfinder mount
Attach the viewfinder.
2 VF connector 1 (25-pin)
Connect to the camera connector of the viewfinder.
3 VF connector 2 (12-pin)
Connect to the VF connector of the camera, using the
supplied viewfinder cables.
4 CURSOR/MARKER switch
Turns the box cursor and markers in the viewfinder on
and off.
CURSOR ON, MARKER ON:
Displays the box cursor, the safety
zone marker, and the center marker.
CURSOR MARKER
ON
ON
CURSOR OFF, MARKER ON:
OFF
Displays the safety zone marker
OFF
and the center marker.
CURSOR OFF, MARKER OFF:
No displey.
CURSOR/MARKER switch
6(E)
Viewfinder mount section and display controls
5 UP TALLY switch
Turn to ON if you want the viewfinder's exterior tally
indicator to light when a tally signal is input (the tally
indicator displayed on the viewfinder monitor screen
cannot be controlled).
6 Box cursor control knobs
Control the size and position of the box cursor
displayed in the viewfinder. The function of the each
knob is as follows.
H-POSI
WIDTH
1 Viewfinder mount
2 VF connector 1
Pushrod hole
3 VF connector 2
4 CURSOR/MARKER switch
H-POSI knob: Moves the cursor
horizontally.
V-POSI
V-POSI knob: Moves the cursor
vertically.
HEIGHT
HEIGHT knob: Changes the width of
the box cursor in the safety zone.
WIDTH knob: Changes the width of the
box cursor in the safety zone.
Box cursor control knobs