Partial Scan - Sony XCD-SX910CR, XCD-SX710CR, XCD-SX910UV, XCD-SX910, XCD-SX710 Technical Manual

Functions

Partial Scan

The partial scan mode is a function for outputting part
of the full images a region of interest on the whole
image. Based on the unit cell as the unit, continuous
parts can be selected. Only rectangles can be selected.
The screen cannot be cut in convex and L
shapes.
Cutting by partial scan mode
Horizontal (Horizontal Direction)
The unit size of both the XCD-SX910CR/SX910UV/
SX910 and the XCD-X710CR/X710 is 1/256th of the
whole screen, divided into 16 sections, horizontally
and vertically.
The partial scan mode for the XCD-SX910CR/
SX910UV/SX910 and the XCD-X710CR/X710 has
had a partial read out function added, and there is a
frame rate speed-up feature for use when the vertical
width of the cut-out is small. But because of the
structure of the CCD, no matter how small the cut-out
width is horizontally, the frame rate cannot be
increased.
When Partial scan mode is used, set Format7, Mode 0.
XCD-SX910CR/X710CR
XCD-SX910UV
11
XCD-SX910/X710