226
Vehicle care
Tail light / brake light (1)
Turn light / hazard warning flasher
(2) outer bulb
Reversing light (3) inner bulb
Rear fog light (4)
6. Attach the bulb carrier to the light
assembly.
7. Attach the cable to the retainer.
8. Attach the light assembly to the
vehicle body and tighten both
screws.
Centre high-mounted brake light
The centre high-mounted brake light
is designed as LED and can not be
changed.
Have lights repaired by a workshop in
case of failure.
Bulb check
Switch on the ignition, operate and
check all lights.
Side turn lights
To replace the bulb, remove the lamp
housing:
1. Slide the lamp to its left side and
remove with its right end.
2. Press the retaining lug upwards
and remove the bulb socket from
the plug connector.
3. Replace the complete unit.
4. Insert left end of the lamp, slide to
the left and insert right end.