Opel COMBO Owner's Manual page 87

Closing the flap
1. Fix the rod in the bracket.
2. Close the flap and lock the locking
device.
3. Restore the seats to the upright
position 3 49, 52
Fitting the protective cover
The protective cover must be
installed whenever the side seat
backrest is folded down and the
partition flap is open.
1. Attach the four snap hooks of the
cover on the corresponding
lashing eye.
2. Pull the head restraint from the
folded backrest, leaving two
notches visible on the head
restraint rod 3 46.
3. Load the objects.
Storage
4. Pass the strap of the cover around
the head restraint. Tension the
strap by pulling at the loose end.
If the loading is stored on the front
and rear seat at the passenger
85