Side Turn Lights - Opel Vivaro Owner's Manual

228 Vehicle care
12. Clip in cover which may have
covered the lower tail light
assembly screw.
13. Attach cover or air vent behind the
tail light if removed before.
Platform Cab
1. Remove the four screws from the
lens.
2. Remove lens from the aperture.
3. Push bulb into socket slightly,
rotate anticlockwise, remove and
renew bulb.
Turn light (1)
Brake light (2)
Tail light (3)
Reversing light (4)
Rear fog light, may be on one side
only (5)
4. Install lens in aperture and
replace the four screws.

Side turn lights

To replace the bulb, remove the light
housing:
1. Slide the lamp housing forward
and remove it at the back. It may
help to use a screwdriver to lever
out the light housing from the
body. Wrap the tip of the
screwdriver with a cloth to prevent
paint damage.