Automatic Light Control; High Beam; High Beam Assist - Opel COMBO Owner's Manual

124 Lighting
Tail lights
Tail lights are illuminated together
with low/high beam and sidelights.

Automatic light control

When the automatic light control
function is switched on and the
engine is running, the system
switches between daytime running
lights and headlights automatically
depending on the external lighting
conditions and information given by
the wiper system.
Daytime running light 3 126.
Automatic headlight activation
During poor lighting conditions the
headlights are switched on.
Additionally, headlights are switched
on if the windscreen wipers have
been activated for several wipes.
Tunnel detection
When a tunnel is entered, headlights
are switched on immediately.

High beam

Push lever to switch from low to high
beam.
Pull lever to deactivate high beam.

High beam assist

This feature automatically activates
the high beam at night when vehicle
is faster than 25 km/h.
It switches automatically back to low
beam when:
● A sensor detects the lights of
oncoming or preceding vehicles.
● Driving in urban areas.
● The vehicle is slower than
15 km/h.
● It is foggy or snowy.
● Front or rear fog lights are
switched on.
If there are no restrictions detected,
the system switches back to high
beam.