Welcome Screen; Setup Assistant; Guest Profile - BMW X5 Owner's Manual

CONTROLS
prevent other drivers from viewing and modifying
the stored settings.
In addition, a guest profile is available that can be
selected by any driver. The guest profile is active
when a personal driver profile has not been se‐
lected.
Changes to the vehicle settings are automatically
stored in the active driver profile or in the guest
profile.
The recognition via remote control and a digital
key, refer to page 91, can be assigned to a driver
profile so that the vehicle will apply the settings
as soon as the driver unlocks the car. As soon as
the vehicle detects the remote control or the dig‐
ital key, the corresponding driver profile will be
activated.
ConnectedDrive countries: The stored settings
in the driver profile can be synchronized with the
personal BMW ConnectedDrive account. It is
thereby possible to use these settings in other
BMW vehicles as well.
Functional requirements
When switching the driver profile, the vehicle
must move at a maximum of walking speed.

Welcome screen

After the Control Display is switched on, the Wel‐
come screen will be displayed.
The following actions can be carried out on the
Welcome screen:
▷ Selecting a driver profile.
▷ Accessing the Settings menu for driver pro‐
files.
▷ Starting the set-up assistant.
This option is offered in new vehicle for a lim‐
ited period of time.
As soon as the engine is started or any button is
pressed, the Welcome screen will be hidden.
98
Opening and closing
Online Edition for Part no. 01402896765 - X/18

Setup assistant

The setup assistant is offered in new vehicles for
a limited period time on the Welcome screen to
configure the most important properties of a new
driver profile.
The driver is guided step by step through the fol‐
lowing functions:
▷ Setting the system language.
▷ Pairing mobile devices with the vehicle.
▷ Non-ConnectedDrive countries: Assigning
profile names.
▷ ConnectedDrive countries:
Enabling the continuous synchronization be‐
tween the ConnectedDrive account and the
driver profile.
Stored settings in the ConnectedDrive ac‐
count are transferred to the vehicle. If a Con‐
nectedDrive account has not been created, it
must be created in the ConnectedDrive por‐
tal.
▷ Confirm the consent for the transmission of
vehicle related data.
▷ Configure the voice command to start the
voice command response.
▷ Switch on the gesture control.

Guest profile

The guest profile can be activated by any driver.
Vehicle settings that are entered when the guest
profile is active will be stored in the guest profile.
In the following cases the guest profile is auto‐
matically active:
▷ A driver profile has not been created yet.
▷ No driver profile has been assigned to the re‐
mote control that was used to unlock the ve‐
hicle.
▷ No driver profile has been assigned to the
digital key that was used to unlock the vehi‐
cle.
▷ It is not clear which driver profile must be ac‐
tivated.