Table of Contents
Advertisement
CBS thus determines the current and future
maintenance requirements. This data can also be
read from the vehicle key by your BMW Service
Advisor and used to propose the optimum scope
of maintenance.
The replacement intervals for the
microfilter and the spark plugs are not
shown in the CBS.
Disconnecting the battery during periods
of long-term storage will interrupt the
calculation of time-based services. BMW
recommends that you have all items requiring
time-based maintenance, such as brake fluid and
possibly also the engine oil and microfilter,
brought up to date by your authorized BMW
center. Also see the section on battery care on
page 8 of this Booklet.
Service Required Display
Info Display screen contents (M6
shown; M5 is similar)
The distance remaining until your next service
briefly appears when you switch on the ignition.
The Info Display immediately switches to its
compute mode when you press one of the
two buttons in the turn signal indicator lever.
For certain maintenance operations, you can
view the respective distance remaining or due
date individually in the Control Display.
Control Display screen contents
The current Status of Service items determined
by the CBS is shown in the Control Display.
You can also view additional information on the
service and maintenance requirements.
1. Open the start menu.
2. Press the controller to select the i-menu.
3. Select "Info Sources" and press the
controller.
4. Select "Service Info" and press the controller.
5. Turn the controller until "Vehicle status" is
selected and press the controller.
6. If necessary, move the highlight marker. Turn
the controller until "Status" is selected and
press the controller.
A list of selected maintenance operations and, if
applicable, inspections required by law is
displayed.
3
Advertisement
Table of Contents
