Driving Tips; Breaking-In Period; Engine, Transmission, And Axle Drive; Driving On Poor Roads - BMW X5 Owner's Manual

Hide thumbs Also See for X5:
Table of Contents

Advertisement

DRIVING TIPS

Things to remember when driving

Vehicle features and
options
This chapter describes all standard, country-spe‐
cific and optional features offered with the series.
It also describes features and functions that are
not necessarily available in your vehicle, e.g., due
to the selected options or country versions. This
also applies to safety-related functions and sys‐
tems. When using these functions and systems,
the applicable laws and regulations must be ob‐
served.

Breaking-in period

General information
Moving parts need to begin working together
smoothly.
The following instructions will help you to ach‐
ieve a long vehicle life and good efficiency.
During break-in, do not use the Launch Control,
refer to page 147.
Safety information
WARNING
Due to new parts and components, safety and
driver assistance systems can react with a de‐
lay. There is a risk of an accident. After instal‐
ling new parts or with a new vehicle, drive con‐
servatively and intervene early if necessary.
Observe the break-in procedures of the re‐
spective parts and components.
312
Things to remember when driving
Online Edition for Part no. 01402896765 - X/18
Engine, transmission, and axle
drive
Up to 1,200 miles/2,000 km
Do not exceed the maximum engine and road
speed:
For gasoline engine 4,500 rpm and
100 mph/160 km/h.
Avoid full load or kickdown under all circumstan‐
ces.
From 1,200 miles/2,000 km
The engine and vehicle speed can gradually be
increased.
Tires
Tire traction is not optimal due to manufacturing
circumstances when tires are brand-new; they
achieve their full traction potential after a break-in
time.
Drive conservatively for the first
200 miles/300 km.
Brake system
Brake discs and brake pads only reach their full
effectiveness after approx. 300 miles/500 km.
Drive moderately during this break-in period.
Following part replacement
Observe the break-in procedures again, if com‐
ponents mentioned above are replaced.

Driving on poor roads

Concept
Because of its greater ground clearance, the ve‐
hicle can be driven on a variety of road types and
qualities.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents