Maintenance Schedule - Ryobi RLT254CDSO Original Instructions Manual

MAINTENANCE SCHEDULE

Every 25
operation
Check if fastener is
fully tightened
Check: Cutting
attachment must not
rotate in idle mode
2
Clean spark arrestor
Replace spark arrestor
Clean air filter
Change air filter
Clean or adjust spark
plug
Replace spark plug
Clean fuel tank and
filter
1
Check fuel hose
Replace fuel filter
1
Check all hose
connections
Inspect fuel cap ot
fuel tank vapor vent (if
equipped) for leakage
Clean the exhaust port
and silencer
1 These items should only be carried out by an authorised service centre.
2 If this requirement is not met, contact an authorised service centre for repair or adjustment.
NOTES:
■ Maintenance should be performed more frequently when product is used in dusty areas.
■ When product has exceeded the maximum figures specified in the table, maintenance should still be cycled according to the intervals of
time or hours stated herein.
Before
hours of
each use 20 hours of
■
■
■
■
■
■
■
■
After first Every 3
month or months or
50 hours of
operation operation
■
Every 6 Every year
months or or after 300
100 hours of hours of
operation operation
■
■
■
■
■