Technical Instructions
Document No. LME-1000
Important Safety Notes
• The LME7 is a safety device. Under no circumstances should the unit be modified or
opened. SCC Inc. will not assume responsibility for damage resulting from unauthorized
modification of the unit.
• All activities (mounting, installation, service work, etc.) must be performed by qualified
staff.
• Before performing any work in the connection area of the LME7, disconnect the unit
from the main supply (all-polar disconnection).
• Protection against electrical shock hazard on the LME7 and all other connected
electrical components must be ensured through good wiring and grounding practices.
• Fall or shock can adversely affect the safety functions of an LME7. Such units must not
be put into operation, even if they do not exhibit any apparent damage.
•
Condensation and the entry of water into the unit must be avoided.
Section 1
Page 12
LME Series
SCC Inc.