Siemens LME7 Series Technical Instructions page 16

Technical Instructions
Document No. LME-1000
Additional accessories are available for flame scanners to prevent heat from getting to the
scanner. For more information, refer to Document No. N7711 and Document No. N7712.
The ACS410 software for the LME7 offers many features including parameter backups, startup
reports, and trending. The software may be downloaded at www.scccombustion.com.
ACS410 Cables – Qty (1) Required if Using the ACS410 Software
To use the ACS410 software, cables are necessary to connect the LME7 to a PC.
Section 1
Additional Flame Scanner Accessories – Optional
Thermal barrier for use with the QRA4.U flame
scanner, and QRI2B2.B180B flame scanner when
THERMAL-
used with right angle adapter AGG90.U. Adapts a
75X75
3/4" NPSM thread to a female 3/4" NPT connection.
Rated for scanner tube temperatures up to 250 °F
Heat insulating lens with spring washer and O-ring,
for applications where the temperature at the
AGG02
scanner will exceed 176 °F. Can be mounted inside
thermal barriers THERMAL-75X75 or THERMAL-1X75
ACS410 Software for Laptop
User-level PC interface module and cable. Permits
access to user level parameters only without the
OCI410.20
ability to perform parameter backups
Service-level PC interface module and cable.
Permits access to user and service level parameters
OCI410.30
and the ability to perform parameter backups
OEM-level PC interface module and cable. Permits
access to all parameters and the ability to perform
OCI410.40
parameter backups
Page 8
LME Series
SCC Inc.