Table of Contents
Advertisement
Cooktops with frame or bevelled edge
Installing the cooktop
Feed the mains connection cable
down through the cut-out.
Position the cooktop in the worktop
cut-out.
Using both hands, press down evenly
on the sides of the cooktop until it
clicks into position. When doing this
make sure that the seal of the
appliance sits flush with the worktop
on all sides. This is important to
ensure an effective seal all round.
If the seal does not meet the worktop
correctly on the corners, the corner
radii (≤ R4) can be carefully scribed to
suit.
Do not use any additional sealant
(e.g. silicone).
Connect the cooktop to the mains
electricity supply.
Check that the cooktop works.
The cooktop can only be removed
using a special tool.
60
Hide quick links:
Advertisement
Table of Contents
