Table of Contents
Advertisement
Problem
After switching on the
cooktop, appears in
the front left cooking
zone display and
appears in the front
right cooking zone
display for a few
seconds. The cooking
zones do not heat up.
The food in the pan
hardly heats up or does
not heat up at all when
the Auto heat-up
function is switched on.
The food in the pan is
barely heating up or is
not heating up at all.
The heating element for
one of the cooking
zones switches on and
off.
Possible cause and remedy
The cooktop is in Demonstration mode.
You need to deactivate Demonstration mode (see
"Programming").
There is too much food in the pan.
Start cooking at the highest power setting and
then turn down to a lower one manually later on.
The pan is not conducting heat properly.
Use a different pan which is better able to conduct
heat on an induction cooktop.
The pan is not conducting heat properly.
Use a different pan which is better able to conduct
heat.
The pan is too large for the cooking zone.
Use a smaller pan.
The outer ring of a double or extended cooking zone
is not switched on.
Switch the outer ring on.
This is quite normal and due to the electronic
regulation of the temperature (see "How the cooking
zones work").
If the heating element switches on and off when the
highest power level is selected, this indicates that the
overheating protection mechanism has triggered (see
"Overheating protection").
Problem solving guide
47
Hide quick links:
Advertisement
Table of Contents
