Actiontec Wireless Ready DSL Router User Manual
DSL Settings
To access
Settings, select
DSL
,
, and Mode settings can be changed from this screen. Actiontec recom-
VPI
VCI
mends not changing these values without consulting the
Restore Default Settings
To restore the Router to its factory default settings, select Restore Default Settings
from the "Utilities" screen. When the "Restore Default Settings" screen appears, click
Restore Default Settings. Any changes made to the Router's settings in the Custom
Setup screens will be lost and the factory default settings will be restored. During
this process, the Router's power
Warning: Do not unplug the power cord from the Router dur-
ing the Restore Default Settings process. Doing so may result in
permanent damage to the Router.
When the Power
LED
operational.
Settings from the "Utilities" screen. The Router's
DSL
flashes and the Router is disabled.
LED
stops flashing and glows steadily green, the Router is fully
42
.
ISP