General Information; Verify Computer Settings - ActionTec GT724WG User Manual

General Information

Router Kit Components
Your router kit should include the following:
• Actiontec GT724WG modem/router
• Power cord
• Two (2) Ethernet cables
• Phone cord
• DSL filters
Please note:
In order to connect the router to your computer, your computer must have an Ethernet Network Interface
(NIC) installed.
Powercycling
If you're experiencing trouble getting an Internet connection, follow the following steps:
1. Turn off the Actiontec GT724WG router.
2. Shut down your computer.
3. Wait 60 seconds.
4. Turn on the Actiontec GT724WG router.
5. Wait 1–3 minutes for all lights to stop flashing on the router.
6. Turn on your computer.
7. If your problem is not resolved, please contact our Technical Support team.

Verify Computer Settings

For All Windows Computers
To verify connection configurations:
1. Select Start, then Control Panel.
Note:
If you do not see Control Panel, select Settings, then Control Panel.
1-888-850-5915
Technical Support
Actiontec GT724WG Router
Setup and User Guide
1
103948/3-11/6960