ActionTec GEU404000-01 User Manual page 40

Actiontec strongly recommends leaving the
Server option is Off, ensure the
the same subnet as the
Server Configuration" below.
DHCP Server Configuration
Clicking Next in the "
Configuration" screen. Change
Beginning Address - the
IP
starts assigning
factory default setting (
Ending Address - the
IP
assigning
IP
ry default settings (
The beginning and ending
Router. If the default values are left intact, the Router supplies a unique
address between
192.168.0.2
Note that the first three groups of numbers of the addresses are identical; this
means they are on the same subnet. The
same subnet as the
address is changed to
and the ending
IP
Server - the primary
DNS 1
provided
DNS
text box intact.
Server - the secondary
DNS 2
vided secondary
leave the text box intact.
Chapter 3 Using Custom Setup
addresses of the networked computers are on
IP
address of the Router. For more information, see "
IP
Server" screen generates the "
DHCP
address range and
IP
address at which the
IP
addresses. Actiontec recommends keeping the
IP
192.168.0.2
Address at which the
IP
addresses. Actiontec recommends keeping the facto-
192.168.0.254
addresses define the IP address range of the
IP
and
192.168.0.254
address range it generates. For instance, if the Router's
IP
, set the beginning
111.33.222.1
address to
111.33.222.254
server provided by the
DNS
server information, enter it here. If not, leave the
provided by the
DNS
server information, enter it here. If not,
DNS
Server option On. If the
DHCP
DHCP
server information here.
DNS
DHCP
).
Server stops
DHCP
).
to each computer on its network.
address of the Router must be on the
IP
address to
IP
.
ISP
. If the
ISP
37
DHCP
DHCP
Server
server
IP
IP
,
111.33.222.2
. If the
ISP
pro-
ISP