Connecting Additional Computers
There are three ways to connect the Router to additional computers for network-
ing: USB or Ethernet cable, or wirelessly. Select the type of connection, then follow
the instructions.
Connecting via Ethernet
☞
Note: If the first computer was connected via Ethernet, an
Ethernet hub or switch must be purchased and installed to add
more Ethernet-connected computers to the network. To con-
nect more computers to the network using an Ethernet hub or
switch, see the documentation that came with the hub/switch.
The following procedure assumes that a computer has not already been connected
to the Router via Ethernet.
1. Insert the Connection
the following window appears, click Next.
Chapter 2 Setting Up the Router
in the
1-2-3 CD
21
drive of the computer. When
CD-ROM