Oki C9000 Series Printing Manual page 54

8. From the [Feature Sets] menu (7), select [Colour –
Graphic Pro 2].
7
8
9
9. From the [RGB Profile source] (8), select the ICC profile
that corresponds to the device you are trying to match
such as your monitor, scanner or digital camera.
Remember that the names "RGB Source 1", "RGB
Source 2" and so on relate to the number assigned to the
profile using Profile Assistant. See
on page 38.
10. From the [Simulation Target Profile] menu (9), select the
profile of the device you wish to simulate.
Remember that the names "CMYK Source 1", "CMYK
Source 2" and so on relate to the number assigned to the
profile using Profile Assistant. See
on page 38.
54
"Using Profile Assistant"
"Using Profile Assistant"
Graphic pro