W
INDOWS
This information applies to the Windows PCL 5c, PCL 6 and
PostScript drivers.
If you are using a source RGB document, simulate the output of
another printer by making the following selections in the printer
driver:
1.
On the printer driver [Colour] tab, select [Graphic Pro]
and click [Options].
1
2.
Select [Printer Simulation] (2).
3.
Select the ICC profile that corresponds to the device used
to capture or display your source document - this could be
a monitor, scanner or digital camera (3).
Remember that the names "RGB Source 1", "RGB
Source 2" and so on relate to the number assigned to the
Graphic pro
2
3
4
(1)
5
49