Troubleshooting - Emerson Rosemount 2051CF Quick Start Manual

Quick Start Guide
7

Troubleshooting

If the device has not joined to the network after power up, verify the correct
configuration of the network ID and join key. Verify the active advertising has
been enabled on the Gateway. The network ID and join key in the device must
match the network ID and join key of the Gateway.
The network ID and join key may be obtained from the Gateway on the Setup
> Network > Settings page on the web interface (see
ID and join key may be changed in the wireless device by using the following
Fast Key sequence. See the Rosemount 2051 Wireless
further troubleshooting.
From the Home screen, enter the Fast Key sequence.
Device Dashboard Fast Keys
18 Rosemount 2051 Pressure Transmitter and Rosemount 2051CF DP Flowmeters Quick Start Guide
3, 5
February 2019
Figure 6-1). The network
Reference Manual for