Installation - Fluke ThermoView TV40 Series User Manual

®
ThermoView TV40 Series
Users Manual, Rev. 1.1, Apr 2019

7.3.4.3 Installation

The camera can only be mounted in the protective housing with standard lens or with wide lens. A mounting
For better handling, an additional handle can optionally be mounted on the housing. See the enclosed
Remove the six hexagon socket screws on the
back of the housing. Remove the rear lid.
Extract the rear flange. Be careful not to lose the
O-ring.
Release the knurled screw and slide the upper rail
away from the lower rail.
60
1.800.561.8187
Note
with tele or macro lens is not possible!
Note
assembly instructions of the manufacturer for installation!
www. .com
information@itm.com