Yamaha VMX12 2001 Service Manual page 368

SWINGARM
3. Tighten:
• left pivot bolt 1
• right pivot bolt 2
• locknut 3
a. Tighten the left pivot bolt 1 to specification.
Left pivot bolt
100 Nm (10.0 m • kg)
b. Tighten the right pivot bolt 2 to specifica-
tion.
Right pivot bolt
6 Nm (0.6 m • kg)
c. Tighten the locknut 3 to specification.
Locknut
100 Nm (10.0 m • kg)
d. Bend the lock washer tab 4 along a flat
side of the locknut.
4. Install:
• brake torque rod 1
WARNING
@
Always use a new cotter pin.
@
5. Install:
• rear wheel
Refer to "REAR WHEEL AND BRAKE
DISC".
7 - 93
CHAS
22 Nm (2.2 m · kg)