Yamaha VMX12 2001 Service Manual page 348

FRONT FORK
8. Install:
• oil seal clip 1
NOTE:
@
Adjust the oil seal clip so that it fits into the
outer tube's groove.
@
9. Install:
• dust seal 1
(with the fork seal driver weight 2)
10.Fill:
• front fork leg
(with the specified amount of the recom-
mended fork oil)
Quantity (each front fork leg)
621 cm
Recommended oil
Yamaha fork oil 10W or equiva-
lent
Front fork leg oil level a
(from the top of the inner tube,
with the inner tube fully com-
pressed and without the fork
spring)
123 mm
NOTE:
@
• While filling the front fork leg, keep it upright.
• After filling, slowly pump the front fork leg up
and down to distribute the fork oil.
@
7 - 73
CHAS
New
3