Keyboard/Mouse Connector; Sync/Async Serial Ports; Table 7-12 Keyboard/Mouse Connector Pin Assignments; Table 7-13 Sync/Async Serial Connector Pin Assignments - Motorola CPCI-6020 Installation And Use Manual

Keyboard/Mouse Connector

Table 7-11 +5Vdc Power Connector (continued)
Pin
4
7.9.9 Keyboard/Mouse Connector
The keyboard/mouse interface is provided by a 6-pin circular DIN connector. To use the
keyboard function only, a keyboard may be connected directly to this connector. To use both the
keyboard and the mouse functions, use the Y-adapter cable provided with the CPCI-6020-
MCPTM-01. Refer to the following table for pin assignments.

Table 7-12 Keyboard/Mouse Connector Pin Assignments

Pin
1
2
3
4
5
6
7.9.10

Sync/Async Serial Ports

The interface for the sync/async serial ports COM3 and COM4 is provided by a 50-pin female
connector. The connector shield for the port is tied to chassis ground. The pin assignments and
signal mnemonics are listed in the following table.
Pin assignments for this connector change depending on which SIM is plugged into the
connector.

Table 7-13 Sync/Async Serial Connector Pin Assignments

Pin Signal
1 TXD3
2 RXD3
3 RTS3
4 CTS3
5 DSR3
6 GND
7 DCD3
8 SP3_P9
9 SP3_P10
10 SP3_P11
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Transition Module Preparation and Installation
Signal
No Connect
Signal
KBD DAT
MS DAT
GND
+5 VDC Fused
KBD CLK
MS CLK
Signal
TXD4
RXD4
RTS4
CTS4
DSR4
GND
DCD4
SP4_P9
SP4_P10
SP4_P11
Pin
26
27
28
29
30
31
32
33
34
35
149