Table of Contents
Advertisement
Hardware Preparation and Installation
You must make sure that the board, when operated in your particular system configuration,
meets the environmental requirements specified below.
Operating temperatures refer to the temperature of the air circulating around the board
and not to the component temperature.
Table 2-2 Specifications
Characteristics
Operating temperature
Temperature change
Forced Air Flow
Relative humidity
Vibration
Shock
Free Fall
Product Damage
High humidity and condensation on the board surface causes short circuits.
Do not operate the board outside the specified environmental limits.
Make sure the board is completely dry and there is no moisture on any surface before
applying power.
38
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Operating
0°C to +55°C (32°F to 131°F) entry
air with forced-air cooling
+/-0.5° C/min according to NEBS
Standard GR-63-CORE
250 LFM @ 55°C (131°F ambient
temperature
5% to 90%
1.0G sine sweep, 5-200 Hz, .25
octaves/min, all 3 axis (operating)
Half-sine, 11 mSec, 30 m/Sec
Environmental Requirements
Nonoperating
–40°C to +70° C (104°F to '158°F)
5% to 90%
5-20 Hz @ 0.01 g/Hz
20-200 Hz @ -3.0 dB/octave
Random 5-20 Hz @ 1 m/Sec
Random 20-200 Hz @ -3 dB/oct
Blade level packaging
Half-sine, 6 mSec at 180 m/Sec
Blade level packaging
100mm (unpackaged) per GR-63-
CORE
Advertisement
Table of Contents
