Copying From Video Devices; Copying All Contents - Sony VRD-MC6 Operating Instructions Manual

Copying From Video Devices

Copying All Contents

This mode allows you to record the entire
video tape content onto a disc. The
DVDirect automatically controls playback
on the connected video device.
Initially, turn on the DVDirect (page 29),
insert a disc (page 30) and connect a DV
(i.LINK) cable for recording (page 33).
z Hint
• If all the preparations are complete for copying,
the DVDirect detects a signal from a camcorder
connecting to the DV IN connector, and the
display window in step 4 appears automatically.
You can skip steps 1 to 3.
1
Press the RETURN button.
The [Menu] display appears.
2
Make sure that [Video b DVD] is
selected, and press the ENTER
button.
3
Press V or v to select [DV IN] and
press the ENTER button.
54
4
Confirm the message in the
display window.
When the DVDirect detects a signal
from a camera connected to the DV IN
connector, [DV] appears in the top left
of the display window.
Type of input
5
Make sure that [Full] appears at
the top right of the display
window, and press the
(record) button to start recording.
The DVDirect starts recording at the
same time the video device starts
playback. If the video tape is not at its
beginning, it will automatically rewind
and the DVDirect will start recording.
During recording, the message
[Recording] appears in the display
window, and the
lights up. The following appears in the
display window.
Copy mode
(record) button