Table of Contents
Advertisement
May 2019
Figure 6-4: LOI Menu
6.3.1
Switch HART revision mode
If the HART
Revision 7, the Rosemount
capability.
Procedure
•
The following procedures will switch the HART revision mode from the
Generic Menu: Manual Setup → Device Information → Identification →
Message.
•
To change to HART Revision 5, Enter: "HART5" in the Message field.
•
To change to HART Revision 7, Enter: "HART7" in the Message field.
Quick Start Guide
®
configuration tool is not capable of communicating with HART
™
3051P will load a Generic Menu with limited
Quick Start Guide
Assign PV
HART Revision
19
Advertisement
Table of Contents
