Sony BPU4800 Operating Instructions Manual page 26

HFR (high frame rate) Data Record Port
The following information is displayed.
Simple display
Detailed display
a Recording format
[FILE] displays the video format of the recording.
b File name
Displays the name of the file being recorded. "Next: FILE" is
displayed before recording.
c Time code display
Displays time code data (TCG).
In detail display mode, UBG, TM1, and TM2 are also
displayed simultaneously.
d [Setting] button
Displays the [Port] screen (page 35) for the corresponding
port to configure port settings.
e Recording indicator
Displays z mark when recording.
Displays icon when a loop recording area is specified.
Replay Port / HD Cut Out Port
The following information is displayed.
Simple display
Detailed
display
a File/output format
[FILE] displays the video format of the file, and [OUT] displays
the video format of the output signal.
f Remaining capacity
Displays the remaining memory capacity.
When a loop recording area is specified, this displays the
capacity of the writable area of the capacity assigned to the
loop recording area. In loop recording, the recording loops
back to the start of the loop recording area when it reaches the
end of the area, overwriting the previous recording. However,
if a subclip is created in a loop recording area file, the subclip
area cannot be overwritten. Accordingly, the capacity of the
loop recording area decreases by the size of the subclip.
If the remaining capacity that can be used for loop recording
is reduced to less than five minutes after creating a subclip in
the loop recording area, further subclips cannot be created.
g [FILE]
Displays the video format of the recorded file.
h Audio tracks
Displays which signal (Rear A/E, CAM Analog, CAM A/E) is
used on each audio track.
b File name
Displays the name of the file being played back. "Sub" is
displayed beside the file name when playing back a subclip.
26