Sony BPU4800 Operating Instructions Manual page 20

Page name Item
Page No.
<OUTPUT FORMAT SLOT1
(LIVE)>
C03
SLOT2
SLOT3
(SDI output only)
<OUTPUT FORMAT SLOT1
(REPLAY)>
C04
SLOT2
SLOT3
(SDI output only)
HD CUTOUT
<GENLOCK> REFERENCE
C05
GENLOCK
SYNC-OUT
VIDEO-OUT
Set value
3840×2160, 1920×1080
SQD, 2SI
HD-SDI, 3G(Lv-A), 3G(Lv-B)
OETF SDR, S-Log3, HLG_BT.2100,
HLG_Live
COLOR BT.709, BT.2020
1920×1080
HD-SDI, 3G(Lv-A), 3G(Lv-B)
OETF SDR
COLOR BT.709
HD-SDI
OETF SDR
COLOR BT.709
3840×2160, 1920×1080
HD-SDI, SQD, 2SI
3G(Lv-A), 3G(Lv-B)
1920×1080
HD-SDI, 3G(Lv-A), 3G(Lv-B)
HD-SDI
OFF, ON
CCU, INTERNAL, GENLOCK
STATUS
FORMAT
PHASE V –1024 to +1023, 0
PHASE H –1700 to +1700, 0
SD SYNC, HD SYNC,
(THROUGH)
VIDEO OUT –256 to +255, 0
PHASE H
Meaning
SLOT1 output format settings
SLOT1 output video resolution setting
SLOT1 4K video division output method setting
SQD: Square Division (quadrants)
2SI: 2-sample Interleave
(The IP output is 2SI, even when SQD is selected.)
SLOT1 video output system setting
SLOT1 OETF setting
SLOT1 color space setting (display only)
SLOT2 output format settings
SLOT2 output video resolution setting
SLOT2 video output system setting
SLOT2 OETF setting (display only)
SLOT2 color space setting (display only)
SLOT3 output format settings
SLOT3 video output system setting
SLOT3 OETF setting (display only)
SLOT3 color space setting (display only)
SLOT1 output format settings (display only)
SLOT1 output video resolution setting
SLOT1 4K video division output method setting
SQD: Square Division (quadrants)
2SI: 2-sample Interleave
(The IP output is 2SI, even when SQD is selected.)
SLOT1 video output system setting
SLOT2 output format settings (display only)
SLOT2 output video resolution setting
SLOT2 video output system setting
SLOT3 output format settings (display only)
SLOT3 video output system setting
HD Cutout mode indicator (display only)
Reference sync signal in use (display only)
Setting and status of reference sync signal input on
REFERENCE IN connector (not displayed when a
CCU is connected)
Status of reference sync signal input on
REFERENCE IN connector (display only).
Format of reference sync signal input on
REFERENCE IN connector (display only).
Output video V phase relative to the input reference
sync signal (delay represented by positive values)
Output video H phase relative to the input reference
sync signal (delay represented by positive values)
SD composite sync signal and HD tri-level sync signal
selector setting.
(THROUGH is selected when a signal is input on the
REFERENCE IN connector.)
Video output phase adjustment (displayed when
connected to CCU).
SLOT1 to SLOT3 output video H phase relative to the
internal sync signal (delay represented by positive
values)
20