Sony BPU4800 Operating Instructions Manual page 22

Page name Item
Page No.
<NETWORKED MEDIA NETWORK
INTERFACE> INTERFACE
C13
<IP LIVE SYSTEM NETWORK
MANAGER> INTERFACE
C14
4K 2SI diamond marks
This function is for displaying a test pattern like the following
in the area at the bottom right of the 4K color bar when 4K 2
sample interleave output. OK is displayed if the connections
for Links 1 to 4 are correct, and OK is not displayed if they are
incorrect. This function can be used to check the
connections.
Set value
SLOT 1 LIVE NMI LAN1, SLOT 1
LIVE NMI LAN2, SLOT 1 REPLAY
NMI LAN1, SLOT 1 REPLAY NMI
LAN2, SLOT 2 NMI LAN1, SLOT 2
NMI LAN2
DHCP OFF, ON
IP ADDRESS 0.0.0.0 ~ 255.255.255.255
SUBNET MASK 0.0.0.0 ~ 255.255.255.255
DEFAULT 0.0.0.0 ~ 255.255.255.255
GATEWAY
MAC ADDRESS 00:00:00:00:00:00 ~
FF:FF:FF:FF:FF:FF
NMI LAN1, NMI LAN2
CONNECTION DISABLE, ENABLE
DHCP OFF, ON, (OFF)
LSM IP 0.0.0.0 to 255.255.255.255
ADDRESS
CONNECTION
STATUS
SLOT1 LIVE DISCONNECTED, CONNECTING,
CONNECTED
SLOT1 DISCONNECTED, CONNECTING,
REPLAY CONNECTED
SLOT2 DISCONNECTED, CONNECTING,
CONNECTED
Meaning
Selects the network interface to be set/displayed.
Enables or disables DHCP.
When DHCP enabled: Displays the IP address
assigned using DHCP for the selected network
interface.
When DHCP disabled: Sets and displays the IP
address for the selected network interface.
When DHCP enabled: Displays the subnet mask set
using DHCP for the selected network interface.
When DHCP disabled: Sets and displays the subnet
mask for the selected network interface.
When DHCP enabled: Displays the default gateway
IP address set using DHCP for the selected network
interface.
When DHCP disabled: Sets and displays the default
gateway IP address for the selected network
interface.
Specified MAC address of the selected network
interface (display only)
Selects the network interface to configure/display.
Sets whether to connect the IP Live System Manager
(LSM) for the selected network interface.
Sets whether to connect the LSM using DHCP
information.
(If DHCP on the NETWORKED MEDIA INTERFACE
page is set to OFF, this function is disabled and OFF
is displayed.)
Sets the IP address of the LSM. The setting is applied
when SET is executed. Disabled when DHCP is set to
ON.
Displays the LSM connection status for the selected
network interface of SLOT1 LIVE.
Displays the LSM connection status for the selected
network interface of SLOT1 REPLAY.
Displays the LSM connection status for the selected
network interface of SLOT2.
22
Correct connections
When Link 1 and Link
2 have been swapped