Table of Contents
Advertisement
SE4400 Integration Guide
Notational Conventions
The following conventions are used in this document:
•
Bullets indicate:
•
action items
•
lists of alternatives
•
lists of required steps that are not necessarily sequential
•
Sequential lists (e.g., those that describe step-by-step procedures) appear as
numbered lists.
Referenced Documents
•
PL 4407 Decoder Integration Guide, p/n 72E-68065-xx
2
•
The I
C-Bus Specification, Version 2.1, http://www.semiconductors.philips.com/
acrobat/literature/9398/39340011.pdf
•
LC99704B-WK3 Sanyo DSP Specification, Version 1 (English)
•
LC99214 Sanyo B&W CCD Sensor Specification, Version 2 (English)
•
Molex connector specification, 54809-3191, http://www.molex.com
Service Information
If you have a problem with your equipment, contact the Symbol Global Customer
Interactive Center at: http://www.symbol.com/customersupport.
Call the Global Customer Interactive Center from a phone near the equipment so that the
service representative can try to talk you through your problem. Have the model number
and serial number of your product with you. If your problem cannot be solved over the
phone, you may need to return your equipment for servicing. If that is necessary, you will
be given specific directions.
Symbol Technologies is not responsible for any damages incurred during shipment if the
approved shipping container is not used. Shipping the units improperly can possibly void
the warranty. If the original shipping container was not kept, contact Symbol to have another
sent to you.
If you purchased your Symbol product from a Symbol Business Partner, contact that
Business Partner for service.
x
Advertisement
Table of Contents
