Date And Time; Advanced Options - IBM Aptiva Hardware Maintenance Manual

−
Drive C Then Drive A. In this option, the system BIOS checks
drive C first. If there is no hard disk drive, the system boots from
drive A.
−
Drive A Only. This option directs BIOS to boot up system from drive
A.
−
Drive C Only. This option directs BIOS to boot up system from drive
C.
Boot from CD-ROM
When enabled, this parameter prompts BIOS to look first for a bootable CD in
the CD-ROM drive. If a bootable CD is present, the system boots from the CD-
ROM. Otherwise, it boots from the drive specified in the System Boot Drive
parameter. The default setting is Enabled.

Date and Time

From the Setup main menu, select the Date and Time option to view or
change the system clock from the Date and Time menu. If you want to change
the system date, enter the date in the format shown on the screen as in the
following example:
Mon Nov 10, 1997
If you change the time, enter the time in 24-hour format (hours, minutes,
seconds). For example:
−
12 midnight is 00:00:00
−
12 noon is 12:00:00
−
1 p.m. is 13:00:00
When setting date and time, press the up- or down-arrow key to highlight a
field. Press the left- or right-arrow key to change the settings.

Advanced Options

From the Setup main menu, select the Advanced Options option to view or
change a variety of configuration settings. The Advanced Options menu
appears, with the following options:
−
Security Options
−
Memory/Cache Options
1-28