Storing Information About Cds; Labeling Discs; Disc Name - Sony SCD SCD-C2000ES Operating Instructions Manual

Storing Information About CDs

Labeling Discs

— Disc Name

The player can store the information called
"Disc Name", up to 100 discs (for the Hybrid
disc, each layer is correspond to the Disc Name).
Once you have stored the disc name for a disc,
the player automatically recalls what you have
stored whenever you select that disc.
You can label discs using up to 12 characters
and have the player display the disc name each
time you select the disc.
Note that you cannot change the disc title of a
TEXT disc.
Labeling discs on the player
1
Insert or select the disc.
2
Press MENU.
3
Turn l AMS L until "DISC NAME"
appears in the display.
4
Press l AMS L.
"NAME INPUT" appears, then the flashing
cursor appears.
5
Turn l AMS L until the character
you want appears in the display.
The following characters can be selected.
A - Z, 0 - 9, + – / < = > ? @ [ \ ] _ (space)
6
Press l AMS L (or M) to select
the character.
The flashing cursor appears to indicate the
next space to be input.
Example:
To input AA
Turn l AMS L until "A" appears.
t Press l AMS L (or M). t
Turn l AMS L until "A" appears.
t Press l AMS L (or M).
7
Repeat Steps 5 and 6 to input more
characters.
8
Press MENU to store the disc name.
Repeat Steps 1 through 8 to assign disc
names to other discs.
Labeling discs using the
remote
1
Insert or select the disc.
2
Press NAME INPUT.
The flashing cursor appears.
3
Press CAPS repeatedly to select the
desired character type.
Each time you press the button, the display
changes cyclically as follows:
"INPUT ABC" (capital letters and
symbols) y "INPUT 123" (numbers)
4
Press the numeric button to input
characters.
x When "INPUT ABC" is selected
To select Do the following:
, +, – Press the numeric button 1*
repeatedly.
A - Z Press the numeric button 2-9
(the button corresponding to
the desired character)
repeatedly.
* If you press > repeatedly after pressing the
numeric button 1, the following symbols can be
selected:
/ < = > ? @ [ \ ] _ (space)
If you press SPACE, you can select space
directly.
x When "INPUT 123" is selected
Press the desired numeric button.
5
Press M to select the character.
The flashing cursor appears to indicate the
next space to be input.
Example:
To input AA
Press the numeric button 2 once. t Press
M. t Press the numeric button 2 once.
t Press M.
6
Repeat Steps 3 through 5 to input more
characters.
continued
US
21