Playing Tracks In Random Order; Shuffle Play; Creating Your Own Program; Program Play - Sony SCD SCD-C2000ES Operating Instructions Manual

Playing Tracks in Random
Order

— Shuffle Play

When Shuffle Play is selected, the player will
play all the tracks on all the discs or on a specific
disc in random order.
Shuffle Play on all discs
You can play all the tracks on all the discs in
random order.
1
Press PLAY MODE (or SHUFFLE on the
remote) repeatedly in stop mode until
"ALL DISCS" and "SHUF" appear in the
display.
2
Press N.
" " appears while the player is "shuffling"
;
the tracks. The player will stop after playing
all the tracks once.
Shuffle Play on one disc
You can play all the tracks on a specific disc in
random order.
1
Press PLAY MODE (or SHUFFLE on the
remote) repeatedly in stop mode until
"1DISC" and "SHUF" appear in the
display.
2
Press DISC 1-5 on the player.
" " appears while the player is "shuffling"
;
the tracks. The player will stop after playing
all the tracks once.
To resume Continuous Play
Press PLAY MODE repeatedly (or CONTINUE
on the remote) in stop mode until "SHUF" and
"PGM" disappear.
Note
The player does not go back to tracks which have
already been played.
Creating Your Own
Program

— Program Play

You can pick out the tracks that you like and
specify the playback order in a program
containing up to 32 steps.
1
Press PLAY MODE repeatedly (or
PROGRAM on the remote) in stop
mode until "PGM" appears in the
display.
2
Press DISC 1-5 on the player, then
press l AMS L (or ENTER on the
remote).
The selected disc number appears in the
display.
When using the remote, press DISC first,
and then the corresponding numeric button
for the disc.
To program all the tracks on a disc at once,
press l AMS L (or ENTER on the
remote) while "AL" is displayed.
3
Turn l AMS L (or press ./>
on the remote repeatedly) to select the
desired track number, then press l
AMS L (or ENTER on the remote).
To select a track number directly
Press the numeric button(s) on the remote.
For track number 11 or over, press >10 on
the remote (page 10).
If you entered the wrong track number
Press CLEAR on the remote. Then repeat
Step 3 to enter the correct track number.
4
Repeat Steps 2 through 3 to enter other
tracks.
Each time you enter a disc or track number,
the total number of program steps appears
in the display.
5
Press N.
Program Play starts.
continued
US
15