Erasing Tracks Of A Cd-Rw - Sony RCD-W100 Operating Instructions Manual

Erasing Tracks of a CD-
RW
You can erase tracks recorded on a CD-RW.
This process starts with the last track on the
disc.
Before erasing the track, make sure that the
disc is not finalized. If the disc is finalized,
follow the instructions for "Unfinalizing a CD-
RW" (page 30).
When using the remote, set DECK A/DECK B
to DECK B.
DECK A/DECK B
ERASE
./>
1
Place a CD-RW that has not been
finalized in DECK B.
Make sure that "TOC" appears in the
display. If a finalized CD is loaded, "TOC"
does not appear.
2
Press ERASE while the unit is stopped.
"Tr Erase?" appears in the display.
3
Press YES.
The last track is selected.
To erase only the last track, go to step 5.
4
5
To erase all tracks
1
YES ERASE
2
3
AMS H
YES
Notes
• Once the erasing process has started, you cannot
• You can erase only from the last track.
• Do not turn off the unit or disconnect the unit from
H
• You cannot erase tracks while playing a disc on
Turn AMS (or press ./> on the
remote) to select the first track you
want to erase.
Press H (or YES).
Erasing starts from the last track. During
erasing, "Tr Erase" appears in the display
and the remaining time for erasing the last
track (may not be accurate) appears. When
this process is finished, the total track
number and the total playing time appears
in the display.
Place a CD-RW that has not been
finalized in DECK B.
Press ERASE repeatedly until "Disc
Erase?" appears in the display while
the unit is stopped.
Press H (or YES).
Erasing starts. During erasing, "Disc Erase"
appears in the display and the remaining
time of erasing (may not be accurate)
appears. When the entire disc is erased,
"Blank Disc" appears.
stop in the middle of the process.
the power source in the middle of the erasing
process.
DECK A.
31