6
Press H.
The unit starts playing. Adjust the volume on
the amplifier.
Do the following:
To
Press x.
Stop playback
Press X. Press the button again or
Pause playing
press H to resume playing.
Press one of the DISC 1-5 buttons.
Select the disc
(for DECK A of
RCD-W500C)
Press DISC SKIP on the remote.
Go to the next disc
(for DECK A of
RCD-W500C) Z
while the
Turn AMS* clockwise
Go to the next
ALBUM SELECT indicator in
track
the display is turned off
(or press
> on the remote ).
while
Turn AMS counterclockwise
Go to the beginning
the ALBUM SELECT indicator
of the current track
in the display is turned off
(or
or the preceding
press . on the remote).
track
OPEN/CLOSE (or A)
Press
,
Remove the disc
whichever contains the disc you
want to remove after stopping
play.
*AMS: Automatic Music Sensor
Tips
• You can start playing from a specific track in step 6.
1 Turn AMS while the ALBUM SELECT indicator
in the display is turned off (or press ./> or
the number buttons on the remote) to select the
track you want to play (see “Using the Display”
on page 13 for details about the displayed
information).
2 Press H.
• You can remove or load discs while playing the
other deck. Press OPEN/CLOSE (or A) of the deck
that is not currently playing to open that tray, and
remove or load a disc.
• The DISC 1-5 button indicator lights orange when
the disc is in the tray. The indicator lights to green
when the disc is selected (RCD-W500C only).
• You can connect headphones to the PHONES jack
on the front panel. Turn the PHONE LEVEL
control to adjust the volume.
• You can replace any discs in the other disc trays
while playing a disc in DECK A of RCD-W500C.
Press A of the deck that is not currently playing to
open that tray, and remove or load a disc (Ex-
Change function).
Page 8