Preparations - Aiwa NSX-AJ700 Operating Instructions Manual

PREPARATIONS

Connection
Plug in the AC power cord to the AC power outlet after all other
connections are made.
1 Connect the front speakers.
Connect the right front speaker to the SPEAKERS R
terminals and the left to the SPEAKERS L terminals. The
En
speaker cords with the white stripes go to the 0 terminals.
2 Connect the supplied antennas.
Connect the FM antenna to the FM 75
the AM antenna to the AM LOOP terminals.
FM antenna
AM antenna
4
3 Connect the AC power cord to an AC outlet.
When the AC power cord is connected to an AC outlet for
the first time, DEMO appears on the display and the control
panel opens.
To deactivate the DEMO, press DEMO.
To close the control panel, press PANEL OPEN/CLOSE.
•Do not short-circuit the 0 and 9 speaker cord leads.
•Do not leave objects generating magnetism or objects
affected by magnetism near the speakers.
terminals and
Remote control
Detach the battery compartment lid at the rear of the remote
control and insert two R6 (size AA) batteries with correct
polarity.
•Replace the batteries with new ones when the operational
distance between the remote control and main unit becomes
shorter.
•Remove the batteries if the unit is not going to be used for
an extended period of time.
•The remote control may not operate if it is used under intense
sunlight, etc., or if its line of sight is obstructed.